Metal wall art is relatively simple to hang when you match the mounting method to the wall, the size of the piece, and the design itself. The most important step is deciding where the weight will be supported before you start making holes in the wall.
This guide covers the basic process for hanging metal wall art and signs safely and cleanly. Because wall materials and installation conditions vary, always choose fasteners that are appropriate for your specific surface and the weight of the item.
Before you begin: choose the location
Hold the piece against the wall or use a paper or tape outline to check the position. Look at it from normal viewing distance instead of judging while standing inches away from the wall.
If the piece hangs above furniture, leave enough breathing room that the art feels connected to the furniture without touching it visually. If it is a house number or address sign, prioritize visibility from the driveway, street, or walkway where it needs to be read.
Know what kind of wall you have
The correct hardware depends on the surface. Drywall, wood, brick, concrete, siding, and masonry all require different approaches. A screw that works perfectly in a wood stud is not automatically appropriate for hollow drywall or brick.
Mounting hardware is not included with Tailored Metal Co. pieces because the correct fastener depends on where the customer installs the product.
Option 1: use pre-drilled mounting holes
For customers who want the most straightforward mounting method, Tailored Metal Co. offers an optional pre-drilled mounting-hole choice on product pages. The number of holes is determined by the size and design of the piece so that the mounting points make sense for the finished product.
With holes already in the metal, you can position the piece, mark the mounting points, install the appropriate anchors or screws, and secure the art directly through the holes.
Basic process
-
Place the art in the desired position.
-
Use a level to check alignment.
-
Lightly mark the mounting-hole locations with a pencil.
-
Move the art aside.
-
Install the correct fasteners or anchors for your wall.
-
Position the artwork and fasten it securely.
Option 2: mount a design without holes
Some customers prefer the clean look of a design without visible holes. Depending on the product, wall type, weight, and installation location, appropriate hooks, clips, standoffs, or other mounting systems may be possible.
Do not rely on an adhesive product simply because it is convenient. Check the manufacturer's rated capacity and whether it is suitable for your wall finish and the weight of the metal piece. Painted drywall, textured surfaces, humidity, heat, and outdoor exposure can all affect adhesive performance.
Use a level—especially for words and address signs
A nature design can sometimes tolerate a tiny visual tilt. A name, address, room sign, or geometric design usually cannot. Even a small angle can be obvious once the piece is on the wall.
A small bubble level or laser level makes installation much easier. If the sign is long, check both mounting points rather than assuming the first mark guarantees the second is level.
For larger pieces, use more than one support point
Multiple mounting points help keep a larger design stable and reduce the chance that it rotates or shifts. This is why the number of pre-drilled holes may increase with the size of the product.
Do not automatically hang a wide metal sign from one central point unless the product and mounting method are specifically designed for that.
Outdoor installations need outdoor-appropriate hardware
Our powder-coated metal décor is designed for indoor and outdoor display, but the wall hardware also needs to be appropriate for outdoor use. Choose fasteners suited to the surface and environment, and consider wind exposure when selecting a mounting method.
Sheltered outdoor placement can also help preserve the finish over time, especially in areas exposed to persistent moisture, salt air, or harsh weather.
Protect the wall while positioning the art
Metal edges can mark a painted wall if the piece is dragged while you are trying to line it up. Have a second person help with larger pieces, or use removable painter's tape as temporary reference marks so you can place the art once instead of repeatedly sliding it around.
A simple hanging checklist
-
Confirm the final location and height.
-
Identify the wall material.
-
Choose hardware rated for the wall and item weight.
-
Use a level.
-
Use multiple mounting points when appropriate.
-
For outdoor installations, use outdoor-rated hardware.
-
Ask for help positioning larger pieces.
Make installation easier when you order
If you know you want a direct screw-through mounting method, choose the Pre-Drilled Mounting Holes option on the product page. We determine the hole quantity based on the size so you do not have to decide whether a piece needs two, three, or four mounting points.
Ready to choose a piece for your wall? Explore our metal wall art collection or browse personalized metal signs.
